Description
This RCJ01 flush-mounted receiver is designed to directly switch mains voltage devices on and off when in the ON/OFF (1- or 2-button operation) or TIMER operating modes.
With its compact dimensions, the RCJ01 can fit into all standard flush-mounted boxes. Up to 32 transmitters can be programmed into the receiver’s memory, ensuring that complex control tasks can be solved easily without taking up unnecessary space.
The programming itself is very simple and is carried out by pressing a button directly on the device.
Coding | Easywave Up to 32 transmitters can be programmed. |
Frequency | 868,30 MHz |
Channels | 1 |
Power supply | 230 V AC, 50 Hz |
Power consumption | 1.2 W standby 1.2 W relay switched (without load) |
Operating modes | ON/OFF (2-button operation) ON/OFF (1-button operation) TIMER (7 minutes, retriggerable) |
Outputs | 1 relay contact (normally open) |
Maximum contact load | see table of loads |
Operating temperature | -20 °C to +60 °C |
Dimensions | 46 x 46 x 25 mm |
- Flush-mounted receiver
- Operating manual
Product numbers | Description |
---|---|
RCJ01E5001-01-23K | Flush-mounted receiver 1-channel, 230 V |
type of load | max. load |
---|---|
resistive load: lamps, 230 V halogen lamps etc. | 10,0 A / 2300 VA |
inductive load: halogen lamps with wound transformers (min. load of transformer 85%) |
2,6 A / 600 VA |
non- or serial-compensated fluorescent lamps with ferromagnetic ballasts | 10,0 A / 2300 VA |
parallel-compensated fluorescent lamps with ferromagnetic ballasts | 2,6 A / 600 VA |
capacity EVG: electronic cut-in units, electronic transformers etc. | 4,0 A / 920 VA |